Scibor Celtic Shoulder Pad Review

I have put most of the Scibor Celtic shoulders on my wolf guard terminators.  The overall sculpts are really good.  They have fine detail but all of the relief sculpture on all of the pads is perfect.  This suits me fine since my painting/theme is beat up and battle worn.  But if you're looking for perfectly crisp detail, it might not fit the bill.

 Each pack comes with eight pads, two of each of the four varieties.  It is a little unusual since the terminator boxes have 5 models.  But the variety is nice and each one is uniquely identifiable from the others.  One set is larger than the other three, making it an obvious choice for a sergeant or special character.

 The sprues are thick and must carefully be sawed to reduce the chance of cracking.  I made the mistake of trying to clip one out, and chipped part of the pad off.  Like I mentioned before, this probably helps my aesthetic, but might not help yours.  It will not be noticeable from normal view however.

Here is my TH/SS from all angles.  He is going to be my Lonewolf/Arjac stand in for now.  I gave him the large ornate set of pauldrons.  

These are probably not the best bits for a beginner.  Working with resin is quite different than plastic, and these need to be shaved down to fit the terminator arms.  I used an x-acto knife to hollow out the inside of the pauldrons little by little.  Test fitting after a few layers until they fit over the arm.  Test fitting is not super necessary, since if you shave too much, green stuff can be added to get the perfect fit.  This was the only downside I found.

The shoulders have a combination of celtic knots, runes, and diamond shaped gems that fit nicely with the Space Wolf theme.  They do not have any fur on them.  I can't wait to paint these up for the full affect, and will not hesitate to try out other Scibor products.

Conclusion:

Pros

• Nice detail
• Unique design
•  Space Wolf Motif
• Easy to find online and in stores
• Other varieties available

Cons

• Some cutting required for proper fit
• Come in an 8 pack instead of 10

Would I recommend to a friend: YES

Overall quality: 9/10

Hope you enjoyed my review!

*I was in no way incentivised to give these a good review.  I paid my own money, and have no affiliation with Scibor Miniatures.

Thunderwolf Idea

I don't have any Thunderwolves yet.  Come to think of it, I don't have any Fenrisian wolves either.  I think that both of these are important to the fluff, and important to the overall theme of a Space Wolf army (go figure).  I was planning to get some Thunderwolves and model them up like normal, but I started to think hard about it.  I stumbled across some forum threads from before there were models back in 5th ed, and listened to the points people made about Space Marines riding wolves. 

I tended to side with the people who thought it was a little over the top to have SM riding wolves.  Not because of realism or because it was ridiculous looking, but because I am a dog lover, and I feel like these warriors are too.  They have their pet wolves accompany them into battle, and they jump in front of bullets, and lay down their lives for their masters.  These wolves are not saddled and ridden, they are comrades, and fellow warriors, and hunters.  They probably live with the marines and eat with them.  I wouldn't saddle my friend.  But I'd go to war with him...

As I thought of how I was going to model them up, I came across some Space Wolves riding Chaos Knight steeds.  This conversion was born out of the lack of models for a unit in the 5th ed. codex.  Take a look:

These look amazing to me.  Don't get me wrong, I love the wolf model of the Thunderwolves, I just don't like a marine riding it.  I was going to field just the wolves alone, and maybe a few guys along side the base or something, but then how would they keep up? But if hey are on a horse, it's obvious how they keep up. 

I plan on getting a box of Chaos Knights, which has 5 horses, and a box or 2 of the Wolf Cav, and fitting the wolf riders onto the horses.  All the models will represent TWC but it will look like a marine unleashed his giant wolves and is following them in the hunt.  This is way more interesting to me.  The stat line of the TWC represents the rider and the wolf both attacking the target.  I feel like it would be impossible to hit something while riding an agile canine who happens to be mauling your target.  But to let the wolf maul some guy and you ride up beside it and smash it, that's more like it!

There are two main themes of a Space Wolf army, space Vikings, and warewolves.  I tend to lean more toward the Viking aspect and don't get too heavy on the warewolves.  I like Bran, so I may make an exception for him, but that's it.  These models scream Viking to me.  Throw in some axes and shields, and you got yourself some real space Vikings.

Here's to some sweet TWC conversions, cheers!



Update on Special Weapons

This is the first time that I am going to put the guns on after I paint the torsos.  I keep hearing how it is basically cheating, but usually I'm in too big a hurry to get them on the table.  I don't have a problem playing with plastic or basecoated models most of the time.

I gave a chainsword to one of the meltagunners because... hes a viking.  'Nuff said.

Since I used some Black Reach Terminators to make Wolf Guard, I am short several sets of Terminator shoulder pads.  My local FLGS carries Scibor so I am going to pick up a few of these:

These are the Celtic #2 set for Terminators 

These are the ones for regular Power Armor.  

I want to put these on my special weapons for some added uniqueness.  I forgot how fun these models are to put together.  The wolf models have so much more opportunity for customization compared to the codex marines.

Hopefully more progress to come!

I had 12 Space Wolves new on the sprue from when I started this army.  I wanted to keep some guys in case I needed some new options. I have taken the opportunity to start building my Grey hunter special weapons to fill in some gaps in my infantry choices.  I had built four wolves with melta guns in 5th ed.  One for each pack, since the pack leader wasn't an upgrade, and he didn't count towards the unit to get the second weapon.  In 7th ed that has changed.  I can now take six in my three squads.  I would also like the option of bringing some plasma guns.  I am building four to start.  That will give me up to two packs with dual plasma guns, and one with melta for some mid field tank hunting.

I think the plasma are a little more fluffy since the Space Wolves are supposed to be the Space Marines that kill other Space Marines when the need arises.  AP 2 here we come!

This also got me thinking about these guys:

I have all my turrets built as twin-linked lascannons.  This add-on looks great, and  I am a huge fan of kitting my Wolves out to the max (just look at my Wolf Guard).  They also have some great claymores that I want to kit out some more infantry with.

These look amazing.  They really have a future greatsword/claymore  feel to them.  While poking around I also stumbled accross these:

I'm not a fan of all of them, but one handed axes are not as easy to come by as I would have hoped.  I have also thought about cutting the upper hand off the 2h axe that comes in the SW sprue.  I will give it a shot and see how it looks.

Pictures to follow.

Made it to Adepticon

Adepticon has come and gone, and it was a great weekend.  I was lucky enough to snag a quick game with Jon from The Overlords Podcast.

It was me vs. Jon and my friend.  They both brought 750 of AM each.  I can't remember the entire army list but they had a Vendetta and a Valkyrie, some heavy weapons squads, and several veterans.  I want to say Sgt. Harker made an appearance and possibly Strakken.

I brought a pretty competitive Tyranids list that I have been working on over the last year and a half.  I had the usual two Flyrants with TLDwBW to start.  That was accompanied by my brand new Hive Crone to round out the flying monstrous creatures.  My troops were two squads of termagants, and I had a Dakkafex, which finishes off the CAD I brought.  The remaining points were invested into the Living Artillery formation, which is comprised of an Exocrine, three Biovores, and 3 Warriors.  They all may re-roll their scatter dice if they are within 12" of the Warriors.

We played the mission with two objectives, one per side, and I won by first blood on turn five.  We called it because Jon had another game to attend, but had it went on the Nids would have eaten everything.  It was way too harsh a list on my part. SORRY JON!

I ended up playing two more game on Saturday, and two more on Sunday for a five game weekend. Not too bad considering I commuted and didn't stay in the hotel.  Next year will be different.  I'm going all out.

Adepticon 2015

Adepticon is 45 days away and the paintshop (i.e. Me) is hard at work completing my Salamanders list.  This army has the most complete, by far, which is why I am just going to finish it up and bring it.  It also can fit in 1 GW case which is a bonus.  I will hopefully get this back up and running  with my hobby progress.

This week I brought up my Sternguard up to a table top quality in just a weekend.  It's amazing what gets done, when I just put paint on models.

Last year I was able to get about 1200pts of Tyranids done, and this year I hope to finish a 'Nid army that I can field, and my entire Salamanders army.  I have added about 10 bikes, and 2 Thunderfire cannons to the army, so I am not as close as I once was to completing it.  Some monstrous creature purchases also means that my ,Nids aren't that close either.  A detailed list with pictures to come.

 So here we have the final product! At long last she roars to life.  In this configuration to the right, we have the Razorback with twin linked lascannon, bolter, and dozer blade.

I love the number of options I have with these.  And since I incorporated to magnets under the top hull, I have the option of adding more later. And remember folks, options are good!

The next is the Rhino shown here with the Razorback turret option next to it, and the dozer blade removed.

The final picture is all the options show separately. I did not magnetize the round hatches, as I thought this was far enough for me, but you are more than welcome to go bananas.

Good luck on your magnetizing projects, and have fun saving some serious dough while doing it.